BACnet® Smart Actuator (B-SA)
BACnet® Smart Actuators (B-SA) are simple control devices with limited resources; it is intended for specific applications.
Note: It is to be expected that some products will not meet all of the profile requirements.
| Manufacturers with BACnet® Smart Actuator (B-SA) Devices | ||
| American Auto-Matrix | ◄Choose a Company | |
| Automated Logic Control | ||
| Honeywell Korea | ||
| Teletrol Systems Inc. | ||
◄Return to the Product Catalog
| Product | Version | Model | Conforms to Profile | PICS | Listing Status |
| NB-V3T | 1.10 | NB-V3T | √ | PICS Document | Not BTL Listed |
|
|
|||||
| The NB-V3T controllers are used in static pressure (NB-V3Tb) or airflow (NB-V3Td). The NB-V3T controllers enable constant volume air handler units (AHU) to supply variable amounts of air. The NB-V3Tb is pre-configured as a bypass controller and provides five (5) digital relay outputs, four (4) analog outputs, five (5) universal inputs, an integrated pressure sensor and an actuator with feedback. The NB-V3Td comes with a single universal input and an actuator with feedback and is intended to control a single damper. | |||||
| Product | Version | Model | Conforms to Profile | PICS | Listing Status |
| NB-VAV | 1.10 | NB-VAV | √ | PICS Document | Not BTL Listed |
|
|
|||||
| The NB-VAV model controllers are variable air volume (VAV) and constant air volume (CAV) terminal box digital controllers. There are five (5) NB-VAV controller types, shown in the table below, that can be employed in a number of different applications. | |||||
| Product | Version | Model | Conforms to Profile | PICS | Listing Status |
|
VAV Controller with Flow Sensor & Actuator |
1.2:14 |
U341v+ |
√ |
||
|
|
|||||
|
Automated Logic's VAV controller. This control module communicates as a slave device on an MS/TP network at 9600 or 38400 baud and runs a built-in control algorithm that receives parameters and status through BACnet objects. These BACnet objects are usually monitored and controlled by a UNI module. All of these models include a built-in flow sensor, and the “plus” models also include an integral actuator. |
|||||
|
VAV Controller with Flow Sensor & Actuator |
1.2:14 |
U141v+ |
√ |
||
|
|
|||||
|
Automated Logic's VAV controller. This control module communicates as a slave device on an MS/TP network at 9600 or 38400 baud and runs a built-in control algorithm that receives parameters and status through BACnet objects. These BACnet objects are usually monitored and controlled by a UNI module. All of these models include a built-in flow sensor, and the “plus” models also include an integral actuator. |
|||||
|
VAV Controller with Flow Sensor |
1.2:14 |
U341v |
√ |
||
|
|
|||||
|
Automated Logic's VAV controller. This control module communicates as a slave device on an MS/TP network at 9600 or 38400 baud and runs a built-in control algorithm that receives parameters and status through BACnet objects. These BACnet objects are usually monitored and controlled by a UNI module. All of these models include a built-in flow sensor, and the “plus” models also include an integral actuator. |
|||||
| Unitary Controller |
1.1:54 |
U551 |
√ |
||
|
|
|||||
|
Automated Logic's zone controller. This control module communicates as a slave device on an MS/TP network at 9600 or 38400 baud and runs a built-in control algorithm that receives parameters and status through BACnet objects. These BACnet objects are usually monitored and controlled by a UNI module.
|
|||||
| Unitary Controller |
1.1:54 |
U253 |
√ |
||
|
|
|||||
|
Automated Logic's zone controller. This control module communicates as a slave device on an MS/TP network at 9600 or 38400 baud and runs a built-in control algorithm that receives parameters and status through BACnet objects. These BACnet objects are usually monitored and controlled by a UNI module. |
|||||
| Unitary Controller |
1.1:54 |
U220 |
√ |
||
|
|
|||||
|
Automated Logic's zone controller. This control module communicates as a slave device on an MS/TP network at 9600 or 38400 baud and runs a built-in control algorithm that receives parameters and status through BACnet objects. These BACnet objects are usually monitored and controlled by a UNI module. |
|||||
| Product | Version | Model | Conforms to Profile | PICS | Listing Status |
| XEM BACnet MS/TP DDC | 1.0 | XEM-CPU-BMS-K-G1 | √ | PICS Document |
BTL Listed |
|
|
|||||
|
This is a Building Controller for Building Automation System (BAS). In addition to control applications for Heating, Ventilation, Air Conditioning the system. This system allows directly connection to other router device. This system is performed by powerful 32-bit microprocessor digital technology. The control program is saved onto a flash memory. Running data is held in RAM, but it can be supported for approximately 72 hours in case of power fail by means of battery backup. It has 16 analog/digital inputs, 8 analog/digital outputs also can provide a total of 128 physical points within max. 16 I/O modules. |
|||||
| Product | Version | Model | Conforms to Profile | PICS | Listing Status |
| eTrac | Rev. 1.00 | 01-182 | √ | PICS Document |
BTL
Listed |
|
|
|||||
|
eTRAC is a modular, low-cost, configurable I/O system for BACnet MS/TP. An eTRAC Transceiver supports up to sixteen I/O points selected based on the requirements of the control application. I/O types supported include analog inputs and analog outputs, dry and wet binary inputs, and binary outputs using triacs or relays for switching line voltage. |
|||||
