RC-Studio® is a full-featured, Windows-based operator interface for Building Management Systems. Operators have password- controlled access to database, scheduling, Control-BASIC™, trending, and graphics programming. RC-Studio® supports BACnet®/IP for communications to both local and Internet connected systems.

 

The MACH-ProSys™ building controller is a powerful central-point DDC controller designed to support multiple BACnet® LAN communication technologies simultaneously through 5 ports: IEEE 802.3 (Ethernet), 2 BACnet/IP, EIA-232 (PTP), and 1 EIA-485 (MS/TP). The MACH-ProSys has 12 inputs and 8 outputs and supports 7 expansion modules that contain 84 inputs and 56 outputs. This flexible and powerful controller also supports up to sixteen Reliable Controls® SMART-Sensors™.

The MACH-ProCom™ BACnet® building controller is a powerful central-point DDC controller designed to support multiple BACnet® LAN communication technologies simultaneously through 6 ports: IEEE 802.3 (Ethernet), 2 BACnet/IP, EIA-232 (PTP), and 2 EIA-485 (MS/TP). Input/Output points are configured through the addition of up to 8 MACH-ProPoint expansion modules. This flexible and powerful controller also supports up to sixteen Reliable Controls® SMART-Sensors™.

The MACH-Global™ building controller is a powerful central-point BACnet® controller designed to support multiple BACnet® LAN communication technologies simultaneously through seven ports: 1-IEEE 802.3 (Ethernet), 1-BACnet/IP, 2-EIA-232 (PTP), and 3-EIA-485 (MS/TP). This flexible and powerful BACnet® controller also supports up to 128 universal input/output hard points directly on board using a combination of eight modular 16-point expansion cards. In addition the MACH-Global™ supports up to sixteen Reliable Controls® SMART-Sensor™ LCDs.

The ETHER-Link™ Portal is a powerful network router that permits convenient and low cost Ethernet/Internet connectivity to the Reliable Controls® MACH-System™. The ETHER-Link™ routes network communications between four BACnet® network technologies: BACnet®/IP, IEEE802.3 (Ethernet), EIA-485 (MS/TP), and EIA-232 (PTP). In addition the ETHER-Link™ supports a large database and full programming capability. Two digital inputs are provided for energy pulse accumulation or state indication.

Peer-to-peer BACnet® controllers accommodating eight universal inputs and eight universal outputs in the base configuration. The MACH1™ BACnet® controller networks to other BACnet® controllers using MS/TP over an EIA-485 port. The native BACnet® controller contains an EIA-232 port for direct workstation or modem connection via either BACnet® PTP or Reliable Controls® Protocol. In addition the MACH1™ BACnet® controller supports up to eight Reliable Controls® SMART-Sensor™ LCDs.

Peer-to-peer BACnet® controllers accommodating eight universal inputs and eight universal outputs in the base configuration. The MACH2™ can be expanded to a total of thirty-two inputs and thirty-two outputs. The MACH2™ BACnet® controller networks to other BACnet® controllers using MS/TP over an EIA-485 port. The controller contains an EIA-232 port for direct workstation or modem connection via either BACnet® PTP or Reliable Controls® Protocol. In addition the MACH2™ BACnet® controller supports up to sixteen Reliable Controls® SMART-Sensor™ LCDs.

The MACH-Stat™ is a peer-to-peer device accommodating up to nine inputs and eight outputs. Optional inputs include setpoint slider, humidity, and occupancy sensors. The MACH-Stat™ features a 6.2 cm X 4.4 cm graphic LCD screen and 5 buttons for direct operator interface at the controller. In addition to the default application screen, which resembles a typical commercial thermostat, the MACH-Stat™ has 7 fully customizable screens accommodating a total of 42 user-defined points. The MACH-Stat is available with an optional Real-Time-Clock. The fully programmable BACnet® controller is well suited for many unitary control and typical thermostat applications.

The MACH-Stat-ND™ is a peer-to-peer device accommodating up to nine inputs and eight outputs. Optional inputs include setpoint slider, humidity, occupancy, and carbon dioxide sensors. The fully programmable MACH-Stat-ND™ BACnet® controller is well suited for many unitary control and typical thermostat applications.

Peer-to-peer BACnet® controllers accommodating eight universal inputs and eight universal outputs in the base configuration. The MACH1™ BACnet® controller networks to other BACnet® controllers using MS/TP over an EIA-485 port. The native BACnet® controller contains an EIA-232 port for direct workstation or modem connection via either BACnet® PTP or Reliable Controls® Protocol. In addition the MACH1™ BACnet® controller supports up to eight Reliable Controls® SMART-Sensor™ LCDs.

Peer-to-peer BACnet® controllers accommodating eight universal inputs and eight universal outputs in the base configuration. The MACH2™ can be expanded to a total of thirty-two inputs and thirty-two outputs. The MACH2™ BACnet® controller networks to other BACnet® controllers using MS/TP over an EIA-485 port. The controller contains an EIA-232 port for direct workstation or modem connection via either BACnet® PTP or Reliable Controls® Protocol. In addition the MACH2™ BACnet® controller supports up to sixteen Reliable Controls® SMART-Sensor™ LCDs.

The MACH-Zone™ is a peer-to-peer device accommodating four universal inputs and four universal (optionally triac or staged triac) outputs. In addition the MACH-Zone™ supports up to four Reliable Controls® SMART-Sensor™ LCDs. The fully programmable MACH-Zone™ BACnet® Controller is well suited for many unitary control applications.

The MACH-Air™ BACnet® Controller is a peer-to-peer device accommodating an integral flow sensor and damper actuator for VAV control applications. The fully programmable MACH-Air™ also provides three universal inputs and three universal (optionally triac) outputs. In addition the MACH-Air™ supports up to four Reliable Controls® SMART-Sensor™ LCDs.